Home page Connect to us
Thursday, March 28, 2024   13:49:17
Resume
Mohammad Kazem Moayyedi
Assistant Professor of Fluid Mechanics Division
Department of Mechanical Engineering


CFD, Turbulence and Combustion Research Laboratory (CTCRlab)

Space Science and Earth Atmosphere Research Laboratory (SEAlab)

 
Education
PhD in Aerospace Engineering (CFD and Non-Linear Dynamical Sys.), Sharif University of Technology


Research Interests
Reduced Order Modeling based on AI and Machine Learning Methods.
Turbulent Flow and Turbulence Modeling.
Geophysical Fluid Dynamics
Environmental Fluid Mechanics.
Fluid Flow Control.
Rotor and Rotary Wing Aerodynamics.
Fluid-Structure Interaction, Non-Linear Vibration and Energy Harvesting.
Multi-Phase Flows
Aeroacoustics.
Fluid Flow and Heat Transfer in Porous Media.


Publications

Peer-Reviewed Journals

Sabetghadam F., Taeibi-Rahni M. and, M.K. Moayyedi, “Gappy Low-dimensional POD: A Poweful Tool for Data Reconstruction of Unsteady Flow Fields”, CFD Journal,Vol. 17, No.3, pp.156-164, 2008.

Taeibi-Rahni M., Sabetghadam F. and, M.K. Moayyedi, “Low-dimensional Proper Orthogonal Decomposition as a Fast Approach of Aerodynamic Data Estimation,” J. Aerospace Engineering (ASCE), 2010, (Link)

M.K. M‌o‌a‌y‌y‌e‌d‌i
, F. S‌a‌b‌e‌t‌g‌h‌a‌d‌a‌m and M. T‌a‌e‌i‌b‌i-R‌a‌h‌n‌i, “Calibrated Reduced Order POD Model for Simulation of Unsteady Incompressible Flows”, Aerodynamics and Fluid Mechanics Journal2012, (Link)

M.S. Hassanvand, A. Torkian, M.R. Sahebnasagh, K. Nadafi, and M.K. Moayyedi Experimental Investigation of the Effectiveness of Various  Additives in Reducing Wind Erosion from Iron Ore Piles”, Health and Environment Journal,  2012 (Link)

M.K. M‌o‌a‌y‌y‌e‌d‌i
, M. T‌a‌e‌i‌b‌i-R‌a‌h‌n‌i, F. S‌a‌b‌e‌t‌g‌h‌a‌d‌a‌m “Fast Data Processing and Inverse Aerodynamic Design Using Low dimensional POD Method”, Sharif Journal of Mechanical Engineering, 2013, (Link)

M.K. Moayyedi and M. Najaf-Beygi “Development of a Reduced Order Model for Estimation of the Field of Flow Based on Proper Orthogonal Decomposition Method Using Interpolation and Extrapolation of High Level Energy Modes”, Aerodynamics and Fluid Mechanics Journal, 2014, (Link)

M.K. Moayyedi
Calibration the Effects of Non-Divergence Free and High Level Energy Modes in POD Reduced Order Model of Incompressible Flows using Adjoint Continuity Equation”, Journal of Solid and Fluid Mechanics 2015, (Link)

M.K. Moayyedi Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure”, AmirKabir Journal of Mechanical Engineering, 2017,
(Link)

M.K. Moayyedi
, E. Jabari, M.M. Hashemi Numerical Simulation of Flow Field and Particles Deposition and Studying the Effects of  Building Architecture on Particles Distribution”, Tabriz University Journal of Mechanical Engineering, 2017, (Link).

M.K. Moayyedi, Direct Numerical Simulation and Reduced Order Modeling of Mass Transfer Under the Influence of Natural Convection Flow Based on Coupling Between Temperature and Concentration Modes”, Sharif Journal of Mechanical Engineering, 2017. (Link)

M.K. Moayyedi, Calibration of Reduced Order POD Model of Unsteady Incompressible Laminar Flow Using Pressure Representation as a Function of Velocity Field Modes”, Tabriz University Journal of Mechanical Engineering,2018, (Link)

M.K. Moayyedi and M. Marvi, Reduced Order Model of Inverse Shape Design and Flow Field Analysis Using Combined form of Geometrical and Flow Modes based on Proper Orthogonal Decomposition”, Journal of Aerospace Knowledge and Technology, 2018.(Link)

M.M. Hashemi, M.K. Moayyedi, E. Jabari, Numerical simulation of Two-Phase Flow and Study of Behavior of Aerosols and Dust Particles Under Different Weather Conditions and Sedimentation Process of Dust”, Journal of Solid and Fluid Mechanics2018 (Link).

M.K. Moayyedi, M.H. Dehghan “Numerical Simulation of Trust Vector Control System based on Secondary Injection and Studying about Effective Parameters Variations on Its Performance”, ISME Journal of Mechanical Engineering, 2018, (Link).

M.K. Moayyedi, A Surrogate Reduced Order Free Vibration Model of Linear and Non-Linear Beam Using Modified Modal Coefficients and HOSVD Approaches”, International Journal of Advanced Design and Manufacturing Technology, 2018, (Link).

M.K. Moayyedi, Najafbeygi, M, A High Fidelity Cost Efficient Tensorial Method Based on Combined POD-HOSVD Reduced Order Model of Flow Field”, European Journal of Computational Mechanics, Vol.27, Issue 4, 2018, (Link).

M.K. Moayyedi, Reduced Order Model for Boundary Instigation of Burgers’ Equation of Turbulence Using Direct and Indirect Control Approaches”, AUT Journal of Mechanical Engineering, 2018, (Link).

M.K. Moayyedi,
Extension Ability of Reduced Order Model of the Unsteady Incompressible Flows Using Combination of POD and Fourier Modes”, Journal of Applied and Computational Mechanics, 2019, (Link)

M.K. Moayyedi, Numerical Study of the Mass Transfer Effects on the Flow and Thermal Fields Structures under the Influence of Natural Convection”, AUT Journal of Modeling and Simulation, 2019, (Link).

M.K. MoayyediA.M. Mirzaei, “Numerical Simulation of the Flow Field around the Space Reentry Capsule and Studying the Effect of Angle of Attack Changes on the Flow Structure”, Journal of Technology in Aerospace Engineering, 2019, (Link).

M.K. MoayyediA. Bashardust, “Numerical Simulation of Airflow and Particle Deposition From the surface of Raw Materials Piles and Studying the Effects of Shape Variations and Free-Stream Velocity on Wind Erosion Reduction”, Journal of Civil and Environmental Research, 2019, (Link).

M.K. Moayyedi, F. Sabaghzadeghan Development of Parametric and Time-dependent Reduced Order Model for Diffusion and Convection-Diffusion Problems Based on Proper Orthogonal Decomposition Method”, AUT Journal of Mechanical Engineering, 2020, (Link).

M.K. Moayyedi, Numerical Simulation and Parametric Reduced Order Modeling of the Natural Convection of Water-Copper Nanofluid”, Transport Phenomena in Nano and Micro Scales Journal, 2020, (Link).

M.K. Moayyedi, V. Azaditalab Modeling of Turbulent Atmospheric Boundary Layer and Dispersion of Solid Microscale Pollutants in an Urban Area Using Large Eddy Simulation”, AUT Journal of Mechanical Engineering, 2020, (Link).

M. Kherad, M.K. Moayyedi, F. Fotouhi Reduced Order Framework for Convection Dominant and Pure Diffusive Problems Based on Combination of Deep LSTM and POD/DMD Methods”, International Journal of Numerical Methods in Fluids, Wiley Publications2021, (Link).

F. Sabaghzadeghan, M.K. Moayyedi, Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition”, Sharif Journal of Mechanical Engineering, 2021, (Link).

S. Afzali, M.K. Moayyedi, F. Fotouhi Development of an Equation-Free Reduced Order Model based on Different Approaches of Feature Extraction for Two-dimensional Steady State Heat Transfer Data Set”, Soft Computing Journal, 2022, (Link).

F. Mohebinejad, M.K. Moayyedi, F. Fotouhi Development of Simulation Software for Temperature Distribution inside Solid Shells Using Combination of AR and CFD Techniques”, Soft Computing Journal, 2022, (Link).

M. Niknam, A. Safavinejad, M.K. Moayyedi A Fast Method based on Dynamic Mode Decomposition for Radiative Heat Transfer in Participating Media”, Journal of Quantitative Spectroscopy and Radiative Transfer, 2022, (Link).

M. Yousefi, M.K. Moayyedi, Electromagnetic Flow-meter Model Using Combination of Numerical Simulation Results and Data Mining Method”, Iranian Journal of Mechanical Engineering (ISME), 2022, (Link).

M. Heidari, M.K. Moayyedi,
Numerical Simulation of Induced Vibrations Due to Low Frequency Flow Oscillations around Piezoelectric Blades to Design the Best Configuration for Energy Harvesting”, Amirkabir Journal of Mechanical Engineering, 2022, (Link).

M.K. Moayyedi and A. Khoshnavid “Numerical Simulation of Airflow and Dust Deposition around a Set of Parabolic Solar Cells to Design an Automated Dust Removing System”, Aerodynamics and Fluid Mechanics Journal, 2022, (Link)

M.K. Moayyedi, Z. Khakzari and F. Sabghzadeghan, “Study the Effect of Eddy Viscosity Approach for Calibration of the DMD based Reduced-order Model to Predict the Long-term Behavior of Convection-Diffusion Equations”, Aerodynamics and Fluid Mechanics Journal, 2022, (Link)

M. Niknam, A. SafaviNejad, M.K. Moayyedi, “Evaluation of a Fast Method based on Proper Orthogonal Decomposition to Study the Radiative Heat Transfer in a Participating Media”, Amirkabir Journal of Mechanical Engineering, 2022, (Link)

E. Soltani, M.K. Moayyedi, F. Fotouhi
Pollutants Transfer Simulation Model using Combination of Augmented Reality Technique and Computational Fluid Dynamics on Mobile Cell Phone Platform”, Amirkabir Journal of Mechanical Engineering, 2022, (Link).

M.K. Moayyedi, F. Bigdeloo and F. Sabghzadeghan, “Stabilized DMD based Reduced-order Model of the Convection-Diffusion Equations at High Reynolds Numbers using the Eddy Viscosity Closure”, Amirkabir Journal of Mechanical Engineering, 2022, (Link)


Conference Presentations

Taeibi-Rahni M., and Moayyedi M. K., “Rotor Wake Modelling and its Effects on Unsteady Aerodynamic Loads of a Helicopter Rotor in Forward Flight”, ICRAMME 2005, International Conference on Recent Advances in Mechanical & Materials Engineering, Kuala Lumpur, Malaysia.

M. Taeibi-Rahni and M. K.Moayyedi, “Blade Twist Effects on Unsteady Aerodynamics Loads of a Helicopter Rotor”, 11th International Conference of Mechanical Engineering, Ferdowsi University of Mashad, 2003.

M. Taeibi-Rahni, F. Sabetghadam, M.K. Moayyedi and M. Hadidoulabi, “Fast Aerodynamics Data Estimation Model Based on Proper Orthogonal Decomposition Method”, 10th Conference on Fluid Mechanics, Yazd University, 2006.

M. Taeibi-Rahni, F. Sabetghadam, and M.K. Moayyedi, “2D Compressible Flow Estimation Model Development Based on Proper Orthogonal Decomposition Method”, 7th Iranian Aerospace Society Conference, Sharif University of Technology, 2008.

F. Sabetghadam, M. Taeibi-Rahni, and M.K. Moayyedi, “Utilization of Low-dimensional POD Method for Reconstruction of Gappy Data of the Unsteady Flow Fields
”, 1st Special Congress on Unsteady Aerodynamics of Iranian Aerospace Society, Sharif University of Technology, 2008.

M.K. Moayyedi, M. Taeibi-Rahni, and F. Sabetghadam, “Calibrated Low-dimensional Dynamical Model for Simulation of Unsteady Incompressible Flows”, 12th Conference on Fluid Dynamics, Noshirvani University of Technology, 2009.

F. Sabetghadam, M.K. Moayyedi, and M. Taeibi-Rahni, “A Fast Approach for Transient Calibration of Low-dimensional Dynamical Model of the Unsteady Incompressible Flows”, 9th Iranian Aerospace Society Conference, Science and Research University of Tehran, 2010.

H. Kiani Mavi, M.K. Moayyedi, F. Torabi, “Three-Dimensional Intelligent Search Algorithm to Exchange Information Between Processing Stages of a Parallel CFD Code”, 9th Conference of Iranian Aerospace Society, Science and Research University of Tehran, 2010.

M.K. Moayyedi, M. Taeibi-Rahni, F. Sabetghdam, “Development of a Low-dimensional POD Method for Reconstructing Gappy Data of the Unsteady Flow Fields using a Time-Advancement Algorithm”, 18th International ISME Conference, Sharif University of Technology, 2010.

M.K.Moayyedi, Taeibi-Rahni M., and Sabetghadam F., “Long Time Extension to Accurate Low-dimensional Dynamical Model Using Combined POD and Fourier Modes”, The 13th Annual and 2nd Intl. Conference on Fluid Dynamics, University of Shiraz, October 2010.

M.K. Moayyedi “Modification of the Reduced Order POD Dynamical Model for Simulation of the Unsteady Incompressible Flows Using Adjoint Continuity Equation”, 10th Conference of Iranian Aerospace Society, Tarbiat Modares University, 2011.

M.K. Moayyedi, M. Taeibi-Rahni, M. Marvi, “Inverse Airfoil Aerodynamic Design Using Proper Orthogonal Decomposition method”, 11th Conference of Iranian Aerospace Society, Shahid Sattari University, 2011.

M.K. Moayyedi, and Najafi, M.R., “A Surrogate Low-dimensional POD Approach For Free Vibration Simulation of Linear Beam Model”, The 2nd International Coference on Acoustics and Vibration, Sharif University of Technology, December 2012.

M.K. Moayyedi, M. Marvi, and M. Taeibi-Rahni, “Low-dimensional POD Inverse Aerodynamic Design and Analysis Model”, 12th Conference of Iranian Aerospace Society, Amirkabir University of Technology, 2013.

M.K. Moayyedi, M. Najafbeygi, and M. Hojaji, “Development of a Fast Reduced Order Model For Predicting the Flow Field Using POD Method”, 15th Conference on Fluid Dynamics, Hormozgan University, 2013.

M.K. Moayyedi, and Najafibeygi, M., “Flow Field Estimation Due to Several Parameters Variations Based on Combined POD/HOSVD Reduced Order Model”, 13th Conference of Iranaian Aerospace Society, University of Tehran, March 2014.

M.K. Moayyedi, Najafi, M.R., and Najafibeygi, M., “A Low-dimensional POD-HOSVD Model for Free Vibration Simulation of Linear Beam under Variations of Several Parameters”, The 4th Conference on Acoustics and Vibration, Iran University of Science and Technology, Tehran, December 2014.

M. Azizi, M.K. Moayyedi, M. Dashti, H. Mahdigholi and A. Torkian, “CFD Simulation of Metal Smelting Furnace Ventilation System”, 4th Annual Conference on Industrial Health and Ventilation, Sharif University of Technology, 2014.

M.K. Moayyedi, and A. Bashardoust, “Numerical Simulation of the Flow Field and Motion of Pollutant Particles Around the Raw Materials Piles”, 23th International ISME Conference, Amirkabir University of Technology, 2015.

M.K. Moayyedi “Numerical Simulation of Fluid Flow and Transfer of Pollutants in a Field Under The Influence of Natural Convection”, 6th Conference of CFD Applications in Chemical and Petroleum Industries, Isfahan University of Technology, 2015.

M.K. Moayyedi, Jabari E., and Hashemi M.M., “Eulerian-Lagrangian Approach for Numerical Simulation of Flow Field and Air Pollutant Particles Movement, Case Study: Central Library Building of University of Qom”, 1st Annual Conference on Water, Environmental and Energy Engineering, Iran University of Science and Technology, 2015.

Jabari E., M.K. Moayyedi, and Hashemi M.M., “Study about the Pattern of Pollutant Particles in Architectural Design of Buildings from an Environmental Perspective”, 3rd International  Conference in Applied Research on Civil Engineering, Architecture and Urban Planning, K.N. Toosi University of Science and Technology, 2016.


M.K. Moayyedi,
E. Jabari, M.M. Hashemi, “Numerical Simulation of Fluid Flow and Pollutants Particles Deposition and Studying the Effects of  Building Architecture Change on their Distribution”, 16th Conference on Fluid Dynamics, Razi University, 2015.

M.K. Moayyedi, M. Doroudi, “Numerical Simulation of Flow and Studying the Behavior of Non-Newtonian Fluid Under The Effects of Geometrical Variations”, 16th Conference on Fluid Dynamics, Razi University, 2015.

M.K. Moayyedi, S. AdelNejad, “Numerical Simulation of Compressible Flow Around the Reentry Capsule and Studying the Effects of Insulating Material on Heat Diffusion”, 16th Conference on Fluid Dynamics, Razi University, 2015.


M.K. Moayyedi, Kazemi, M., “Reduced Order Framework for Free Vibration Simulation of Linear and Non-linear Beam Model”, The 5th International Conference on Acoustics and Vibration, University of Tehran, December 2015.

 

M.K. Moayyedi, “Numerical Simulation of Coupled Mass, Momentum and Heat Transfer in the Field Under Effects of Bouyancy Forces”, The 9th International Chemical Engineering Congressand Exhibition, Shiraz University, December 2015.

M.K. Moayyedi, H. Dehghan, “Numerical Simulation of Secondary Injecting Flow and Investigating the Effects of Jet Angle and Location on Thrust Force Variations”, 24th International ISME Conference, Yazd University, 2016.

M.K. Moayyedi, H. Dehghan, “Numerical Simulation of Thrust Vector Control by Secondary Injection in the Over-Expanded Nozzle and Investigation about the Effective Parameters on Thrust Vector Variations.”, 15th Conference of Iranian Aerospace Society, Civil Aviation College, Tehran, 2016.


M.K. Moayyedi, A. M. Mirzaei, “Numerical Simulation of Flow Around Reentry Capsule and Studying The Effect of Angle of Attack Changes on The Flow Field Structure”, 1st International Conference on Mechanical and Aerospace Engineering, University of Tehran, 2016.

E. Jabari, M.K. Moayyedi, A. M. M. Hashemi, “Three-dimensional Numerical Simulation of Solid Pollutant Particles Flow and Studying the Effect of Building Architecture on Their Distribution”, 9th Annual Conference of Civil Engineering, Ferdowsi University of Mashhad, 2016.


M.K. Moayyedi, “Reduced Order Modeling of Mass, Momentum and Heat Transfer in the Field Under Effects of Natural Convection”, 7th Conference on CFD Applications in Chemical and Petroleum Industries, Shahid Bahonar University of Kerman, 2016.

M.K. Moayyedi, “Numerical Simulation of Natural Convection and Studying the Effects of Schmidt Number Variations on Mass Diffusion and Convection”, 8th Conference on CFD Applications in Chemical and Petroleum Industries, Tarbiat Modaress University, 2017.

M.K. Moayyedi, A. Ghaedi, “Flow Control Around a 2D Wing and Its Effects on Aerodynamics Performance Using Blowing and Suction Flow Strategies”, 22th International ISME Conference, Tarbiat Modaress University, 2017.

M.K. Moayyedi, M. H. Ebrahimi, “Computational Modeling of Turbulent Flow Around a Low Power Wind Turbine and Investigation about the Effects of Freestream Velocity Variations on Blade Loading”, 2nd International Conference on Mechanical and Aerospace Engineering, Kharazmi University, 2017.

M.K. Moayyedi, E. Jabari, and F. Zahedi, Numerical Simulation of Flow in the River and Studying the Effects of Geometry and Density of barriers on Manning Roughness Coefficient and Fluid Energy”, 17th Conference on Fluid Dynamics, Shahroud University of Technology, 2017.

M.K. Moayyedi, and A. Bashardoust, “Eulerian-Lagrangian Approach for Simulation of Air Flow and Motion of Particles from the Stockpile of Raw Materials”, 3rd Heat and Mass Transfer Conference, Noushirvani University of Technology, 2017.

M.K. Moayyedi, and A. Bashardoust, “Numerical Simulation of the Pollutants Emission Due to the Air Flow around the Raw Material Stockpile and Studying about the Effects of Geometric Variations”, 6th Conference on Air and Noise Pollution Managment, Sharif University of Technology, 2018.

M.K. Moayyedi, and A. Bashardoust, “Numerical Simulation of the Turbulent Air Flow and Pollutants Deposition around Building in Urban Areas Using URANS Approach”, 26th Conference Iranian Society of Mechanical Engineers, Semnan University, 2018.

M.K. Moayyedi, and A. Bashardoust, M.H. Nobakhti, “Computational Modeling of the Turbulent Flow and Pollutants Deposition in Urban Areas Using DES Method”, 3rd International Conference on Mechanical and Aerospace Engineering, Khaje Nasir University of Technology, 2018.

M.K. Moayyedi, and A. Bashardoust, R. Khachikian, “Computational Simulation of Aerodynamic Flow around MSL Reentry Capsule in Early Stage Entering into MARS Atmosphere”, 3rd International Conference on Mechanical and Aerospace Engineering, Khaje Nasir University of Technology, 2018.

M.K. Moayyedi, Bashardoust A., Nobakhti M.H., Studying about the Effects of Arrangement and Height of Buildings in Urban Environments on the Concentration of the Small Scale Solid Particles Using Numerical Simulation, 2nd International Dust Conference, University of Ilam, 2018.

M.K. Moayyedi
, Shahverdi M.R., Inverse Aerodynamic Design of Subsonic Airfoil Using Combination of Flow Field Simulation Data and Geometric Variables Changes Model, 17th Iranian Aerospace Society Conference, Science and Research Branch, IAU, 2018
.

M.K. Moayyedi, Vaezi E., Numerical simulation of the flow around the Boeing 800-737 aircraft at the take-off and Cruise flight Regimes and Studying about its aerodynamic performance, 17th Iranian Aerospace Society Conference, Science and Research Branch, IAU, 2018.


Vaezi E., M.K. Moayyedi, “Investigating the Effect of the Side Angle on the Sound Propagation Caused by the Airflow Surrounding a Commercial Airplane Model Near the Ground”, 8th Internationa Conference on Acoustics and Vibration, December 2018.

 

Vaezi E., M.K. Moayyedi, “Numerical Simulation of the Effect of the Winglet on Acoustic Waves Propagation Caused by the Airflow on the Wing of the Boeing 800-737 aircraft in Cruise Flight”, 8th Internationa Conference on Acoustics and Vibration, December 2018.

M.K. Moayyedi, Sabaghzadeghan F., Development of the Reduced Order Model for the Mass Diffusion Equation Based on the Proper Orthogonal Decomposition Method”, 9th Conference on CFD Applications in Chemical and Petroleum Industries, University of Tehran, 2018.

M.K.Moayyedi, and V. Azaditalab, “Numerical Simulation of Turbulent Air Flow around Urban Buildings Using Large Eddy Simulation”, 7th Air and Noise Pollution, Shahid Beheshti University, 2018.

A. Bashardust, M.K.Moayyedi, and M.H. Nobakhti, “Modeling of Airflow and Small Size Particles Deposition around the Buildings and Studying the Effects of Their Height Changes on the Concentration of Pollutants”, 7th Air and Noise Pollution, Shahid Beheshti University, 2018.

M.K.Moayyedi, and A. Khoshnavid, “Investigating the Effect of Accumulation and Deposition of Dust Particles on the Efficiency of Solar Cells using Numerical Simulation”, 27th Annual and International Conference of Iranian Society of Mechanical Engineering, Tarbiat Modaress University, 2019.

M.K.Moayyedi, and M. Yousefi, “Numerical Simulation of Electromagnetic Flow Meter Model and Studying the Effects of Changes of Geometrical Parameters of Piping System on Its Performance”, 27th Annual and International Conference of Iranian Society of Mechanical Engineering, Tarbiat Modaress University, 2019.

A. Bashardust, M.K.Moayyedi, and M. H. Nobakhti, “Numerical Modeling of Turbulent Flow and Small Size Solid Particles Deposition in the Vicinity of Buildings by Comparing RANS and DES Models”, 27th Annual and International Conference of Iranian Society of Mechanical Engineering, Tarbiat Modaress University, 2019.

M.K.Moayyedi, and M. Esfandi, “Numerical Simulation of the Unsteady Flow and Heat Transfer through the Nozzle of Propulsion System”, 4th Conference of Iranian Society of Aerospace Propulsion, Aerospace Research Institute, 2019
.


M.K. Moayyedi, M. Esfandi, “Numerical Simulation of the Effects of Fuel Combustion and the Resulting Gases on the Exhaust Flow from a Nozzle of a Propulsion System”, 18th Conference on Fluid Dynamics, September 2019.

M.K. Moayyedi, V. Azadi-talab, “Numerical Simulation of Air Flow and Solid Pollutant Dispersion around a Building in Urban Areas using Large Eddy Simulation”, 18th Conference on Fluid Dynamics, September 2019.

M.K. Moayyedi, A. Safavi-Nejad and M. Niknam-Sharak, “Estimation of Heat Strength of Radiant Furnaces based on Reduced Order Model using Genetic Algorithm”, 18th Conference on Fluid Dynamics, September 2019.

M.K. Moayyedi, F. Sabaghzadeghan, “Development of a Reduced Order Model for Convection-Diffusion Equation based on Proper Orthogonal Decomposition Method”, 18th Conference on Fluid Dynamics, September 2019.

M.K. Moayyedi, M. Yousefi, “Numerical Simulation of 3D Model of Electromagnetic Flow Meter and Studying the Effects of Magnetic Field on the Flow Structure”, 18th Conference on Fluid Dynamics, September 2019.

M.K. Moayyedi, A. Khoshnavid, “Numerical Simulation of Air Flow Pattern and Dust Particle Deposition on the Surfaces of a Collection of Parabolic Solar Cells”, 18th Conference on Fluid Dynamics, September 2019.

M. Heidari, M.K. Moayyedi, “Numerical Simulation of Induced Vibration of Circular Cylinder and Piezoelectric Blade and Studying about Open and Closed Circuit Model Outputs for Electrical Power Generation”, 8th International Conference on Acoustic and Vibration, Dec. 2019.

M. Heidari, M.K. Moayyedi, and E. Razani, “Numerical Simulation of Resonance in Unsteady Flow around the Circular Cylinder and Piezoelectric Blade and Its Effects on Induced Vibration and Electrical Voltage Value”, 8th International Conference on Acoustic and Vibration, Dec. 2019.

F. Sabaghzadeghan, M.K. Moayyedi, “Reduced Order Model for Prediction of Temperature Variations due to Conductive Heat Transfer based on Proper Orthogonal Decomposition”, 4th Annual Conference on Computational Physics, Jan. 2020.

M. Kherad, M.K. Moayyedi, F. Fotouhi, “Reduced Order Modeling of Kelvin-Helmholtz Instability Using Deep Auto-Encoder Neural Network”, 4th Annual Conference on Computational Physics, Jan. 2020.

M. Golzar, M.K. Moayyedi, F. Fotouhi, “Evaluation of Different Methods Based on Machine Learning Algorithms for Modeling of the Unsteady Two-dimensional Diffusion Equation”, 4th Annual Conference on Computational Physics, Jan. 2020.

M.K.Moayyedi, R.Rabiey, “Studying the Effects of Lewis Number Variations on Flow Structure and Mass Transfer in a Field under the Influence of Natural Convection Using Numerical Simulation,” The 8th Fuel and Combustion Conference of Iran, Tabriz, 2020.

M.K. Moayyedi, N. Ahadi, and B. Tavakoli, “Numerical Simulation of Stable Atmospheric Boundary Layer Flow around Low Height Hills”, 28th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2020.

M.K. Moayyedi, S. Shahriari, “Numerical Simulation of the Effects of Moisture Injection on Temperature Variations of Greenhouse Equipped with Fan and Pad Ventilation System”, 28th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2020.

F. Lotfi, M.K. Moayyedi, and S. Shahriari, “Flow Simulation in an Agricultural Greenhouse with Side Air Vents and Underfloor Heating System”, 28th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2020.

N. Ahadi, M.K. Moayyedi, “Comparative Study of LES and RANS Models for Numerical Modeling of the Atmospheric Boundary Layer around Low Height Hills”, 29th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2021.

F. Lotfi, M.K. Moayyedi, “Simulation of Flow and Thermal Fields inside a Greenhouse with a Standard Roof for Utilization in Winter Season ”, 29th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2021.

S. Mashak Sh., M.K. Moayyedi, R. Kamali Moghadam and M. Najafi, “Numerical Simulation of Bubble Dynamics inside a Blood Vessel”, 29th Annual and International Conference of Iranian Society of Mechanical Engineering, June 2021.

S. Kavehee., M.K. Moayyedi, R. Kamali Moghadam and M. Najafi, “Numerical simulation of blood flow through pulmonary artery containing blood clots”, 18th International Conference of Iranian Aerospace Society, May 2021.

Z. Parnian, M.K. Moayyedi, and M. Heidari, “Feedback control of induced vibration due to vortex shedding around a circular cylinder based on load changes acting on the piezoelectric blade”, 11th International Conference on Acoustic and Vibration, Dec. 2021.



Job Experiences

Assistant Professor of Mechanical Engineering, Department of Mechanical Eng., University of Qom
Educational & Research Deputy Director of School of Engineering, September 2014-2017
Head of Mechanical Engineering Department, 2011-2014
Head of Thermal-Fluid, Aerospace Eng. Committe, Department of Mechanical Engineering, July 2014-Now


Professional Affiliations
Iranian Society of Mechanical Engineers (ISME)
Iranian Aerospace Society (IAS)
Iranian Society of Solar Energy
Iranian Society of Acoustic and Vibration(ISAV)
Physical Society of Iran
American Helicopter Society
(AHS)

Teaching Experiences

Undergraduate Courses

Fluid Mechanics I
Fluid Mechanics II
Gas Dynamics

Aerodynamics

Numerical Computations
Engineering Mathematics

Introduction to CFD
Biological Fluid Mechanics

Graduate Courses
Advanced Fluid Mechanics
Advanced Engineering Mathematics
Turbulence and Turbulent Flow
Advanced Computational Fluid Dynamics
Special Topics in Fluid Mechanics
Special Topics in Computer Eng. (Applications of Machine Learning in Weather Forecasting and Smart Cities)
Special Topics in Computer Eng. (Applications of Machine Learning in Modeling of Dynamical Systems)

Graduate Students

PhD Students

M. Niknam, PhD Student, Department of Mechanical Engineering, University of Birjand, 2018 (In Progress), With Collaboration Dr. SafaviNejad.

M. Golzar, PhD Student, Department of Computer Engineering, University of Qom, 2018 (In Progress), With Collaboration Dr. Fotouhi

M. Kherad, PhD Student, Department of Computer Engineering, University of Qom, 2019 (In Progress), With Collaboration Dr. Fotouhi

Master Students

S. Mashak, Department of Mechanical Engineering, University of Qom, 2021 (In Progress), With Collaboration Dr.Kamali (Aerospace Research Institute).

S. Kavehee, Department of Mechanical Engineering, University of Qom, 2021 (In Progress), With Collaboration Dr.Kamali (Aerospace Research Institute).

F. Ashtianipour, Department of Mechanical Engineering, University of Qom, 2021 (In Progress), With Collaboration Dr.Kamali(Aerospace Research Institute).

Z. Parnian, Department of Mechanical Engineering, University of Qom, 2021 (In Progress)


Graduated

M. Marvi, Department of Aerospace Engineering, Sharif University of Technology, 2013, With Collaboration Prof. Taeibi-Rahni

M. Najafbeygi, Department of Aerospace Engineering, University of Tehran, 2012-2013, With Collaboration
Dr. Sabur

M. Hashemi, Department of Civil Engineering, University of Qom, 2015, With Collaboration
Dr. Jabari

A. Ghaedi, Department of Mechanical Engineering, Azad University of NajafAbad, 2017.

A. Ahmadi, Department of Civil Engineering, University of Qom, 2016, With Collaboration Prof. Rajaei


F. Zahedi, Department of Civil Engineering, University of Qom, 2017, With Collaboration Dr. Jabari

A. Bashardust, Department of Mechanical Engineering, Science and Research University of Tehran, 2018, With Collaboration Dr. Nobakhti.

F. Sefat, Department of Civil Engineering, University of Qom, 2018, With Collaboration Dr. Jabari

F. Alikhah, Department of Computer Engineering, University of Qom, 2019, With Collaboration Prof. Torkian (Sharif U. Tech)

S. Saadat,  Department of Computer Engineering, University of Qom, 2019, With Collaboration Prof. Torkian (Sharif U. Tech)

F. Sabaghzadeghan, Department of Mechanical Engineering, University of Qom, 2019.

V. Azaditalab, Department of Mechanical Engineering, University of Qom, 2020.

M. Esfandi, Department of Mechanical Engineering, University of Qom, 2020.

S. Afzali, Department of Computer Engineering, University of Qom, 2021, With Collaboration Dr. Fotouhi

A. Khoshnavid, Department of Mechanical Engineering, University of Qom, 2021.

S. Shahriari, Department of Mechanical Engineering, University of Qom, 2021

M. Yousefi, Department of Mechanical Engineering, University of Qom, 2021

M. Heidari, Department of Mechanical Engineering, University of Qom, 2022

E. Razanii, Department of Mechanical Engineering, University of Qom, 2022.

N. Ahadi, Department of Mechanical Engineering, University of Qom, 2022.

F. Lotfi, Department of Mechanical Engineering, University of Qom, 2022.

E. Soltani, M.Sc., Department of Computer Engineering, University of Qom, With Collaboration Dr. Fotouhi, 2022.

F. MohebiNejad, Department of Computer Engineering, University of Qom, With Collaboration Dr. Fotouhi, 2022.


Personal Information
Contant Information
Department of Mechanical Engineering
 School of Engineering
University of Qom,
Qadir Blvd, Qom, Iran
Phone : 0098-25-3210-3574
                                       

 

HomePage  | SiteMap | Contact to us

Copyright  © 2010 Qom.ac.ir All rights reserved
Home | Back |
Guest (Qomuniguest)

دكتر محمد كاظم مؤيدي - عضو هيأت علمي گروه مهندسي مكانيك دانشكده فني و مهندسي دانشگاه قم
Powered By : Sigma ITID